Archive

Posts Tagged ‘2.’

Fractal Design Arc XL Review

Fractal Design Arc XL Review

Manufacturer: Fractal Design
UK price (as reviewed):
£101.41 (inc VAT)
US price (as reviewed): $129.99 (ex Tax)

The Arc line of Fractal Design cases fall into its performance category. As such, having plenty of airflow is key, as is the ability to install lots of high-end components and water-cooling gear. We’ve been thoroughly impressed by the latest cases in the range, the midi-tower Arc Midi R2 and the micro-ATX Arc Mini R2. With the Arc XL, Fractal has now also seen fit to make an Arc case suitable for those with larger motherboards and components, something it has also done previously with the low-noise Define range of cases.

*Fractal Design Arc XL Review Fractal Design Arc XL Review *Fractal Design Arc XL Review Fractal Design Arc XL Review
Click to enlarge
The chassis certainly lives up to the XL in its name. At over 570mm tall it’s capable of housing both E-ATX and XL-ATX motherboards, and is of a similar size to the Corsair Obsidian 750D. As expected, it sports the classic Fractal black and white colour scheme, with white PCI brackets and fan blades. It’s also very much an Arc chassis, with the hefty mesh sections on the roof and front panel along with the large, tinted side panel window ensuring aesthetic uniformity throughout the range. Build quality is of the usual high standards – there’s a little bend to the side panels but that’s just a result of them being so large, and elsewhere the plastic and steel exterior is solid and sturdy.

*Fractal Design Arc XL Review Fractal Design Arc XL Review
Click to enlarge
The front mesh section clips on and off with ease thanks to a pair of push pins, and as usual it’s backed by dust filtering material too. Removing it reveals a duo of 140mm/120mm fan mounts, with a single 140mm Silent Series R2 fan mounted in the top one. The design allows you to install fans here without popping off the entire front panel, which is handy. However, above this section are the four covers for the optical drive bays, which do require front panel removal to access.

The I/O panel is located on the roof, and comprises four USB ports (two being USB 3), dual audio jacks, power and reset buttons and a fan control switch, which has 5V, 7V and 12V settings and can control up to three fans. The action of the power button is fine, but the reset one is too small to use your fingers with – this could become annoying in troubleshooting situations but it does mean you’ll never accidentally press it when fumbling for a USB port or the like.

*Fractal Design Arc XL Review Fractal Design Arc XL Review *Fractal Design Arc XL Review Fractal Design Arc XL Review
Click to enlarge
Practically the entire roof is formed from another mesh and dust filter combination. Unlike the front one this cannot be clipped in and out of place, but Fractal recommends simply cleaning it with a hoover while it’s still attached. Beneath it there is room for three 120mm or 140mm fans, with another 140mm Silent Series R2 fan included in the furthest back mount. This is complemented by the case’s third and final fan (the same model), which is fitted as a rear exhaust.

Moving to the bottom of the Arc XL, we find a set of feet that lift the case some way of the ground, and which are fitted with rubber rings to give it excellent grip on all surfaces. A slide out dust filter is fitted here, and it protects both the PSU and the last of the case’s fan mounts, a 140mm/120mm one on the case floor. Unlike many cases, the filter here is relatively easy to replace without having to tilt the case on its side.

Specifications

  • Dimensions (mm) 232 x 552 x 572 (W x D x H)
  • Material Steel, plastic
  • Available colours Black
  • Weight 13.8kg
  • Front panel Power, reset, 2 x USB 3, 2 x USB 2, stereo, microphone, fan controller
  • Drive bays 4 x external 5.25in, 8 x internal 3.5in/2.5in, 2 x internal 2.5in
  • Form factor(s) E-ATX, XL-ATX, ATX, micro-ATX, mini-ITX
  • Cooling 2 x 140mm/120mm front fan mounts (1 x 140mm fan included), 1 x 140mm/120mm rear fan mount (140mm fan included), 3 x 140mm/120mm or 1 x 180mm and 1 x 140mm/120mm roof fan mounts (1 x 140mm fan included), 1 x 140mm/120mm bottom fan mount (fan not included)
  • CPU cooler clearance 180mm
  • Maximum graphics card length 330mm (480mm without HDD cage)
  • Extras Removable dust filters, triple speed fan controller

Article source: http://feedproxy.google.com/~r/bit-tech/hardware/~3/-0KOqiLNvQ8/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/ERrZIjzzTzU/

NZXT announces the Phantom 240 chassis

NZXT announces the Phantom 240 chassis

NZXT has only announced the white Phantom 240, but more colours are expected.


NZXT has taken the wraps off of a new chassis, the Phantom 240, and it’s the least expensive of the Phantom range.

With a mid-tower ATX design, the Phantom 240 maintains the range’s signature asymmetrical shape that has divided opinion since launch and sports curved front and roof panels. The case also features a large side panel window and while NZXT has only officially announced the classic white version, it’s hinted that further colours will be coming, so it’s possible we’ll see black, grey and even red editions too.

It ships with two 120mm fans out of the box – a front intake and a rear exhaust. These are NZXT’s FN V2 models, which were recently redesigned to provide better cooling and produce less noise.

In total, the case can house six 120mm fans – two in the front, one in the rear, one in the bottom and two in the roof (where 140mm fans are also supported). Water-cooling support hasn’t been confirmed, but we’d be surprised if double radiator all-in-one coolers were not supported, given that NZXT itself produces a range of them.

Inside, there’s also room for three 5.25-inch drives and six internal 3.5-inch or 2.5-inch drives, and both optical drives and hard drives can be mounted tool-free, judging by the released photos. We also see that the case has a number of cable routing holes (without grommets), a large CPU cooler cutout on the motherboard tray and reusable PCI brackets. Other features include external USB 3 ports and dual audio jacks as well as a removable HDD cage.

The suggested retail price of the NZXT Phantom 240 is $69.99. We’ve enquired about UK pricing and will update if and when we receive and official response, but our estimates (based on a conversion with tax added) puts the case at or around £55.

Does the Phantom 240 look like it could take the budget case market by storm (trooper), or is it more likely to wind up in bargain bins? Let us know your thoughts in the forums.

Article source: http://feedproxy.google.com/~r/bit-tech/news/~3/GjsWwN9iTZQ/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/dmlH9l1XjpU/

Nanoxia Deep Silence 4 Review

Nanoxia Deep Silence 4 Review

Manufacturer: Nanoxia
UK price (as reviewed):
£64.99 (inc VAT)
US price (as reviewed): Currently unavailable

As the name suggests, the top priority of Nanoxia’s Deep Silence range of cases is noise reduction. While a bespoke water-cooling system can do wonders for your system’s noise output, cases designed specifically to contain noise are an easier and more financially realistic option for most people. The noise (or rather the lack thereof) of the Deep Silence 1 and Deep Silence 2 chassis certainly impresses, but cooling performance also takes a hit – a classic trade-off. We’re now looking at the Deep Silence 4 (Deep Silence 3 having apparently been skipped), which brings the now familiar design to the micro-ATX form factor for an attractive £65.

*Nanoxia Deep Silence 4 Review Nanoxia Deep Silence 4 Review *Nanoxia Deep Silence 4 Review Nanoxia Deep Silence 4 Review
Click to enlarge
The Deep Silence 4 is available in three different colours, and each one has a nice brushed metal effect on the plastic front section. Elsewhere, there’s little visual fanfare, but like the Fractal Design Define series the case is modest looking and refined. Build quality on the outside is good all round, and the feet have large rubber pads to contain vibrations, and they also provide the case with plenty of grip and clearance.

The Deep Silence 4 features a case door that occupies the top third of the front panel. Opening it up reveals the reset button and the two optical drive covers, which can easily be clipped in and out of place. You’ll also find an impressively powerful set of fan controllers for so small and cheap a case. Each of the two variable speed sliders can be used to control the speed of up to three fans each.

*Nanoxia Deep Silence 4 Review Nanoxia Deep Silence 4 Review *Nanoxia Deep Silence 4 Review Nanoxia Deep Silence 4 Review
Click to enlarge
While we can’t complain about the ability to control six fans, it’s a little odd given that you can sadly install just three to the chassis itself, including the two that are bundled with it. These 120mm Deep Silence models, which have green blades, are fitted in the front intake and rear exhaust positions. The third and final fan mount, which can take both 120mm and 140mm models, is found in the roof, as the two side panels and the floor of the case are devoid of any extra ones. While we understand that the Deep Silence 4 is designed for low noise, having such a limited ability to expand upon the default cooling is nonetheless disappointing.

The front intake pulls air in through small vents on the sides of the front panel, as well as a single larger one beneath it. It’s blocked off entirely at the front, however, so airflow from this fan is unlikely to be that high, even at full speed.

*Nanoxia Deep Silence 4 Review Nanoxia Deep Silence 4 Review *Nanoxia Deep Silence 4 Review Nanoxia Deep Silence 4 Review
Click to enlarge
Thick, spongy material designed to suppress noise lines the inside of the front door. Sadly, the bottom section of the front has no door, but it too is backed by noise dampening material, as are both side panels and the roof. The roof even includes a foam-backed blanking plate for the single fan mount, which is excellent to see – your case will be quieter and protected from dust when you’re not using this mount. A slide out dust filter is also provided for the PSU, while the front fan has its own one too (though you’ll need to pop the front panel off to access it), meaning the Deep Silence 4 is fully shielded against dust.

The final thing of note on the case’s exterior is the front panel connections. There’s nothing special here, though with two USB 3 ports alongside a USB 2 one and the usual audio jacks, there’s easily enough for a £65 case.

Specifications

  • Dimensions (mm) 200 x 480 x 380 (W x D x H)
  • Material Steel, plastic
  • Available colours Black, anthracite (reviewed), white
  • Front panel Power, reset, 2 x USB 3, USB 2, stereo, microphone
  • Drive bays 2 x external 5.25in, 6 x internal 3.5in/2.5in, 1 x internal 2.5in
  • Form factor(s) Micro-ATX, mini-ITX
  • Cooling 1 x 120mm front fan mount (fan included), 1 x 120mm rear fan mount (fan included), 1 x 140mm/120mm roof fan mount (fan not included)
  • CPU cooler clearance 160mm
  • Maximum graphics card length 265mm (395mm without HDD cage)
  • Extras Dual channel variable speed fan control, removable dust filters

Article source: http://feedproxy.google.com/~r/bit-tech/hardware/~3/Ula2tkMFI7w/1

Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/jAElZ_LCdsY/

YoYoTech Easter 2014 discounts available now

YoYoTech Easter 2014 discounts available now

YoYoTech’s discounts are available from now until April 25th


Starting today, our friends at YoYoTech are hosting some week-long Easter Specials, with discounts quietly being made available on a select range of Asus motherboards, graphics cards and accessories.

As bit-tech readers, you’re the first and only ones to know about it, and we’ve asked YoYoTech to provide links to the discounted products, which you’ll find below.

If any of them take your fancy, we recommend getting in there quick as stocks are limited and the deals won’t be returning once they’re exhausted.

First up we have two Asus ROG-branded Intel Z87 motherboards, the Maximus VI Hero and the mini-ITX Maximus VI Impact, both of which did enough to earn themselves awards in our reviews (here and here). You’ll find them both discounted by £20 at £128.99 and £151.99 respectively.

For AMD fans, YoYoTech is offering the Asus Sabertooth 990FX R2.0 for £109.59 again at a £20 discount. We’ve not reviewed this new revision, but the original board was also award-winning.

Continuing the theme of £20 discounts on Asus products, YoYoTech will have the Asus GTX 760 DirectCU II OC card going for £169.99.

Finally, the Asus NFC Express will be offered at £15.99, a £7 discount. Using near field communication technology, this accessory works with specific Asus motherboards to provide instant pairing with NFC-enabled phones and tablets, which can then be used to control various functions of your desktop PC.

These deals will be ending on April 25th – will you be taking the plunge on any?

Article source: http://feedproxy.google.com/~r/bit-tech/news/~3/IqeyVK3eC0E/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/zn9W2nGqs3o/

Intel Q1 financials show data centre growth

Intel Q1 financials show data centre growth

Intel’s Q1 2014 results slightly exceeded analysts’ expectations, but the company’s mobile arm is suffering a significant drop in revenue.


Intel has released its financials for the first quarter of 2014, and things are looking good with better-than-expected results despite its continued struggles to break into the mobile arena and a still-shrinking desktop market.

The company’s official figures for the quarter show $12.8 billion in revenue, exactly matching analysts’ expectations, with a gross profit margin of 59.7 per cent for a total earnings per share of $0.38 – above the $0.37 average expected by analysts. $3.1 billion of this came from the Data Centre Group, responsible for server and high-performance computing (HPC) products, which enjoyed a bumper 11 per cent boost in revenue over the same period last year; the PC Client Group, which targets the still-shrinking PC market, brought in the lion’s share at $7.9 billion, a one per cent drop compared to Q1 2013.

In the first quarter we saw solid growth in the data centre, signs of improvement in the PC business, and we shipped five million tablet processors, making strong progress on our goal of 40 million tablets for 2014,‘ claimed Intel’s chief executive Brian Krzanich during the company’s earnings call. ‘Additionally, we demonstrated our further commitment to grow in the enterprise with a strategic technology and business collaboration with Cloudera, we introduced our second-generation LTE platform with CAT6 and other advanced features, and we shipped our first Quark products for the Internet of Things.

Other highlights include a 10 per cent quarter-on-quarter drop in revenue for the Internet of Things Group which ended the quarter with $482 million in revenue, still an 11 per cent improvement over the same period last year thanks largely to new low-power Atom and Quark processor products. The company’s Mobile and Communications Group, responsible for smartphone and tablet oriented chips, was by far the biggest loser: with just $156 million in revenue, its income was down 52 per cent quarter-on-quarter and a massive 61 per cent compared to Q1 2013.

Investors seem pleased with Intel’s performance in the quarter, with the company’s share price rising 1.08 per cent in pre-market trading to $27.06, still short of its recent April 2012 high of $28.38.

Article source: http://feedproxy.google.com/~r/bit-tech/news/~3/wmuy1iLfscs/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/6I9NMbCFm50/

Noctua NH-U12S Review

Noctua NH-U12S Review

Manufacturer: Noctua
UK price (as reviewed):
£47.99
US price (as reviewed): $69.99

When all-in-one coolers started hitting the cooling scene a few years ago, you’d be forgiven for thinking it was the end of the road for premium air coolers. Noctua is one of the most established and recognised brands out there in the enthusiast scene, but even we have to admit that value hasn’t always been one of the company’s strong points. In the face of a growing number of super-cheap and capable coolers such as Deepcool’s GAMMAXX S40, you might think paying more than £30 for a CPU cooler isn’t worth it considering how well the latter performs for just £20.

*Noctua NH-U12S Review Noctua NH-U12S Review *Noctua NH-U12S Review Noctua NH-U12S Review
At £47.99, the NH-U12S isn’t even a humongous air cooler and you get a much smaller bit of kit than it’s larger sibling, the NH-D14, which retails for just £10 more. However, the NH-U12S isn’t about raw cooling. With a maximum rated noise of just over 22db(A) and even less using the included low noise adaptor, this is a cooler for those where noise reduction is just as important as a chilly CPU.

*Noctua NH-U12S Review Noctua NH-U12S Review *Noctua NH-U12S Review Noctua NH-U12S Review
Part of the reason for the NF-F12′s high price is the NF-F12 PWM Focused Flow 120mm fan included in the box. This retails for £17 on its own – one of the most expensive fans on the market. There’s a whole raft of technical blurb in this fan’s specifications but the long and short of it boils down to Noctua claiming it produces a better quality noise by utilising many of these swanky features such as a focused flow frame, varying angular distance and vortec-control notches, plus better airflow and cooling.

The heatsink itself is up to Noctua’s usual standards, however, if you haven’t seen one of the Austria-designed cooler’s in person before, that’s essentially the same as saying build quality is epic. Crammed into this diminutive cooler, which measures just 158mm tall and 125mm wide, are five heatpipes built into a compact array of aluminium fins, plus a copper contact plate that sports a nickel plating.

*Noctua NH-U12S Review Noctua NH-U12S Review *Noctua NH-U12S Review Noctua NH-U12S Review
Even the packing is a labour of love, with everything packed into premium-feeling cardboard boxes that are all exactly the right size to take up precisely 100 per cent of the outer box. It’s not often we feel compelled to make this sort of comment but it’s totally justified here. As such, with everything labelled for each socket, despite the above average amount of mounting components, installation is fairly painless.

The fan clips are second only to SilverStone’s latest coolers such as the AR01 , in terms of ease of use – no spindly, awkward things here, which is just as well as you need to fit the single 120mm fan after you’ve mounted the cooler to the motherboard.

*Noctua NH-U12S Review Noctua NH-U12S Review *Noctua NH-U12S Review Noctua NH-U12S Review
Also included are all the fittings needed to mount a second fan, including the brown antivibration corner pads plus a low noise adaptor that can drop the maximum rpm from 1,500 to 1,200, slotting in between the 3-pin power feed and the standard PWM fan cable. Everything you need is included in the box, including an extra-long screwdriver to reach the mounting screws.

*Noctua NH-U12S Review Noctua NH-U12S Review *Noctua NH-U12S Review Noctua NH-U12S Review

Specifications

  • Compatibility Intel: LGA775 and LGA1366 (with optional NM-I3 kit) LGA115x, LGA2011; AMD: AM3(+), AM2(+), FM2(+), FM1
  • Size (with fan) (mm) 125 x 71 x 158 (W x D x H)
  • Fan(s) 1 x 120mm, 300-1,500RPM
  • Stated Noisemax 22.4dB(A)

Article source: http://feedproxy.google.com/~r/bit-tech/hardware/~3/f6X5KuGdDGo/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/pbuxrgz6koQ/

MSI Shows Z97 Motherboards Including Mini-ITX

MSI Shows Z97 Motherboards Including Mini-ITX

MSI looks set to continue its support for mini-ITX when Intel’s Z97 chipset arrives


Following a leak that showed images of future products, MSI has released a few previously locked-down images of its new range of motherboards.

We’re assuming they sport Intel’s anticipated Z97 chipset, which still uses LGA1150 CPUs, and is set for launch this summer.

As we reported here, there will be several ‘Gaming-series’ motherboards, but the images show Gaming 3, Gaming 5, Gaming 7 and Gaming 9 name titles in addition to a mini-ITX board.

Many of the boards feature 802.11ac WiFi adaptors, with the mini-ITX board sporting what appears to be a custom, integrated adaptor on the I/O panel, rather than a standard slot on the PCB.

The Gaming 9 model looks like quite a beast, with an imposing red and black colour scheme and we also spotted an M.2 expansion slot between the two lower 16x PCI-E slots along with voltage measuring points near the on-board power button.

MSI Shows Z97 Motherboards Including Mini-ITX MSI Shows Z97 Motherboards Including Mini-ITX
MSI Shows Z97 Motherboards Including Mini-ITX MSI Shows Z97 Motherboards Including Mini-ITX
MSI Shows Z97 Motherboards Including Mini-ITX MSI Shows Z97 Motherboards Including Mini-ITX
The Gaming 3, Gaming 5 and Gaming 7 also offer the M.2 expansion slot, which suggests this will be a familiar feature on Z97 boards, although it appears to be absent from the funky-looking mini-ITX model.

What do you make of MSI’s new line-up? Let us know in the forum.

Article source: http://feedproxy.google.com/~r/bit-tech/news/~3/BMxYBu4fE7A/1

Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/neS9TbHVKqc/

Quantenna promises 10Gb/s Wi-Fi in 2015

Quantenna promises 10Gb/s Wi-Fi in 2015

Quantenna’s existing MU-MIMO chipset can be found in Asus’ newest router, but its success next year promises up to 10Gb/s of bandwidth via 802.11ac’s MU-MIMO technology.


Wireless communications specialist Quantenna has announced the development of a Wi-Fi chipset capable of ten gigabit per second (10Gb/s) throughput, with plans to release it commercially next year.

Perhaps the biggest complaint regarding Wi-Fi – aside from alleged health implications, disproved by scientific rigour – is that its performance can lag behind that of a wired connection. Even if you’re right next to an access point, the actual throughput of a 1.3Gb/s 802.11n Wi-Fi link is usually well below that of a 1Gb/s wired Ethernet connection – and the further away you travel from the access point, the slower it gets. Said bandwidth is also shared between all users; if you’re on a heavily-congested access point, you can expect the performance of your connection to drop significantly.

Quantenna is hoping to resolve this problem by giving wireless connections significantly more headroom, starting with a 10Gb/s chipset based on the 802.11ac standard which improves support for Multi-User Multiple-Input Multiple-Output (MU-MIMO) connectivity. Extending the existing MIMO technology, which uses multiple antennas to isolate signals and reject noise, MU-MIMO allows for multiple connections to individual client devices which are no longer competing for the same bandwidth. The result: significantly improved performance and reliability.

Quantenna’s 8×8 architecture with adaptive beamforming demonstrates that the ‘massive MIMO’ promise of significantly higher throughput, robustness, and reduced interference can be realised in practice,‘ claimed Andrea Goldsmith, Stephen Harris Professor of Electrical Engineering at Stanford University, in support of the company’s work. ‘This architecture will also significantly enhance the capabilities of MU-MIMO, allowing it to support interference-free transmission to many more devices simultaneously. These technology advances will transform the landscape of applications and devices that Wi-Fi can support.

Quantenna’s MU-MIMO chipset is already used in Asus’ latest Wi-Fi router, but the version due for release in 2015 will be considerably improved. ‘Wi-Fi is no longer a convenience,‘ claimed Quantenna chief executive Sam Heidari at the announcement. ‘People expect it to ‘just work’ even with demanding applications like HD video streaming. With Quantenna’s 10G Wi-Fi, they’ll always get the performance they expect—even as their expectations continue to rise.

The company’s existing chipset, which supports 4×4 MU-MIMO antenna configurations, will be extended in 2015 to support 8×8 MU-MIMO setups offering a total aggregate throughput of 10Gb/s. How much such a feature will add on to the cost of commercially available routers and access points that choose to implement it, however, has not been announced.

Article source: http://feedproxy.google.com/~r/bit-tech/news/~3/m9CHaY5Meeg/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/9pSldeYswdk/

Corsair Carbide Series Spec-01 Review

Corsair Carbide Series Spec-01 Review

Manufacturer: Corsair
UK price (as reviewed):
£37.99 (inc VAT)
US price (as reviewed): $54.99 (ex Tax)

Budget enclosures are rarely the most exciting, but they’re a necessary and crucial part of the market due to the sheer volume of cases sold at lower price points, especially in developing economies around the world. Thankfully, such products have come a long way in recent years, so even if you’re not paying top dollar you don’t need to settle for sacrificing basic features and build quality.

Corsair, one of the most well known chassis manufacturers, is now setting its sights on the high volume budget market with three cases launching today under the Carbide Series Spec brand. The Spec-01, which we’re looking at here, is the cheapest of the bunch at just £38, and also Corsair’s cheapest enclosure to date. Its previous budget Carbide case, the 200R, had lots of features and build quality but was lacking in the cooling department, so hopefully the Spec-01 will improve on this.

*Corsair Carbide Series Spec-01 Review **NDA 11/04 2pm** Corsair Carbide Series Spec-01 Review *Corsair Carbide Series Spec-01 Review **NDA 11/04 2pm** Corsair Carbide Series Spec-01 Review
Click to enlarge
Externally, the Spec-01 is no dull black box, but as ever its styling won’t be to everyone’s taste. The thick vertical grilles at the front guard the case’s red LED 120mm intake fan. Meanwhile, both side panels are extruded, with the left one also housing a large square window.

Build quality is very respectable on the outside. The front panel may be plastic, but it’s thick and rigid and doesn’t bend or creak, and though the case is fairly light its steel panels have only a little flex when pressure is applied. Our one small gripe is that the plastic feet have no rubber soles, so there’s little grip on smooth surfaces.

*Corsair Carbide Series Spec-01 Review **NDA 11/04 2pm** Corsair Carbide Series Spec-01 Review
Click to enlarge
Below the front 120mm fan is a second 120mm mount. There are also two empty 120mm mounts on the roof and a further one at the rear, for a total of five. Even at £38, we were a little disappointed to find that the front intake is the case’s only fan. We’ve seen similarly priced cases such as the NZXT Source 210 and Antec One ship with two fans. Also, even when limited to one fan we’d pick a rear or roof exhaust position over a front intake, as this is typically more effective at cooling. The empty mounts do mean that the CPU area is at least well ventilated, so there are openings through which heat can rise, but without fans to exhaust air faster overclocked systems may find the CPU and VRM areas rapidly getting hot when the system is under load.

*Corsair Carbide Series Spec-01 Review **NDA 11/04 2pm** Corsair Carbide Series Spec-01 Review
Click to enlarge
One thing that’s good to see in so cheap a case is dust filtering material, which is fitted to the rear of the front grilles. It’s not independently removable but the front panel itself is easy to pop off for cleaning. There’s also a slide out filter beneath the PSU, though like many such designs it can be difficult to replace properly without lifting the case up slightly. One overlooked area is the roof, where the empty fan mounts are unshielded from dust, though it’s rare to see filters in this location at this end of the market.

The I/O panel includes a single USB 3 port with an internal header, alongside the usual audio jacks and a USB 2 port. It’s a shame that both USB ports aren’t USB 3 ones, but one is still better than none. There’s no built in fan control, but the power and reset buttons are solid and satisfying to press. Beneath the I/O panel are the two 5.25-inch drive bay covers.

Specifications

  • Dimensions (mm) 200 x 413 x 467 (W x D x H)
  • Material Steel, plastic
  • Available colours Black
  • Front panel Power, reset, USB 3, USB 2, stereo, microphone
  • Drive bays 2 x external 5.25in, 4 x internal 3.5in/2.5in
  • Form factor(s) ATX, micro-ATX, mini-ITX
  • Cooling 2 x 140/120mm front fan mounts (1 x 120mm fan included), 1 x 120mm rear fan mount 2 x 120mm roof fan mounts (fans not included)
  • CPU cooler clearance 165mm
  • Maximum graphics card length 420mm
  • Extras Removable dust filters

Article source: http://feedproxy.google.com/~r/bit-tech/hardware/~3/2FVauqm8yuo/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/dDwmT7Xafs0/

Antec Kühler H2O 950 Review

Antec Kühler H20 950 Review

Manufacturer: Antec
UK price (as reviewed):
£65.94
US price (as reviewed): $84.99

Of all the companies that have jumped on the all-in-one liquid cooler band wagon in the last few years, Corsair and Antec have usually been the ones to beat. Antec has ruled the roost for a while with its great software suite and awesome cooling and the Kühler H2O 920 held the top spot until Corsair’s Hydro H80i and SilverStone’s Tundra TD03 turned up.

Antec Kühler H20 950 Review
With the Kühler H20 920 now going end of life, its replacement, the Kühler H20 950 looks to fill its shoes. Like its predecessor, the Kühler H20 950 is a dual fan-wielding beast with a 50mm-thick radiator. However, where the Kühler H20 950 differs from pretty much any all-in-one that’s gone before it is the location of the pump. Instead of sitting on top of the waterblock, Antec has chosen to place the pump on top of the front fan bearing.

Antec Kühler H20 950 Review Antec Kühler H20 950 Review
It’s a slightly bizarre decision as the radiator is usually the one thing that you’ll have issues installing seeing as the waterblocks on all-in-one liquid coolers are usually so small. However, it shouldn’t make much difference to cooling seeing as the coolant temperature tends to equalise fairly quickly in most liquid cooling loops anyway. That said, there’s an awful lot of extra engineering that has to go into creating a radiator with two additional ports and four tubes so we’re glad to see the price remains competitive. In fact, the Kühler H20 950 is £5-10 cheaper than Corsair’s similar H80i.

Antec Kühler H20 950 Review Antec Kühler H20 950 Review
The front fan sports directional blades at the rear (a lot like those on SilverStone’s Air Penetrator fans), which Antec claims focus air through the radiator. The radiator itself has moderately dense fin packing and is clearly designed to work best with two fans in a push-pull setup. The rear fan is a standard 120mm type but if you’re partial to removing the stock fans and using your own premium models, this won’t be possible with the Kühler H20 950 as the front fan and pump are essentially a single-piece design.

With no pump in tow, the waterblock is exceptionally thin. However, this didn’t mean it was particularly easy to fit. Antec employs a rather fiddly mounting bracket to deal with both AMD and Intel sockets with a variety of sprung pins being used to secure it to the motherboard. However, securing these was easier said than done; we’re not usually inclined to deduct too many points here for the simple reason that you only fit your cooler once even in a span of several years. Needless to say, if you struggle for patience, Corsair’s current coolers are less inclined to have you in fits of rage.

Antec Kühler H20 950 Review Antec Kühler H20 950 Review
The centre of the waterblock illuminates depending on how toasty your CPU is. As with the Kühler H20 920, there’s a bundled application that allows you to set a user-defined, extreme or silent fan profile. Out of the box, we doubt anyone with a modern system won’t be able to use the Kühler H20 950 as its compatible with everything from LGA775 upwards on Intel motherboards plus AMD Socket AM2 upwards as well, including Socket FM2.

Specifications

  • Compatibility Intel: LGA775, LGA115x, LGA1366, LGA2011; AMD: AM3(+), AM2(+), FM2(+), FM1
  • Radiator size (mm) 120 x 159 x 50 (W x D x H)
  • Water block size (mm) approx. 70 x 70 x 26 (W x D x H)
  • Tubing length approx. 300mm
  • Fan(s) 2 x 120mm, 600-2,400RPM
  • Stated NoiseNot stated

Article source: http://feedproxy.google.com/~r/bit-tech/hardware/~3/HHxKQUzV3aE/1


Article source: http://feedproxy.google.com/~r/GamingRipplesWeb/~3/A-DV9l4_ecQ/